3.3.
Installation of glass screens and adjustable legs
• Carefully remove cardboard and foam foil from the
glass screens.
• Remove all contaminations from the glass shields
which could burn out on the glass during operation
of The Square (in particular fingerprints).
• Install glass shields and adjustable legs in the
corresponding slots on the appliance as shown
below
• Remove the glass shield only in case of damage of
the glass.
3.4.
Gas cylinder montage (only LPG version)
• The gas linkage attached to the device allows to place the gas bottle maximally 3 meters away from the connected
control panel, however it cannot be placed closer to the device than 1,5 meters. You can follow the local regulations
if it provide different distance requires. A smaller gas cylinder can be connected and placed inside the appliance.
Before use, compare the size of the cylinder with the available space in the appliance.
Gas cylinder outside the device
Fig. 3
Gas cylinder inside the device
(Available space inside the appliance is 450x420 x460mm – D x W x H)
6
– Glass installation