Assembly Instructions; Unfold The Baby Stroller; Front Wheels Installation; Rear Wheels Installation - Belluno Baby MOMO TWIN Manual De Instrucciones

ASSEMBLY INSTRUCTIONS

01

UNFOLD THE BABY STROLLER

• Remove the security lock (Fig. 1).
• Take the stroller from the handlebar and pull up to assemble the frame
(Fig. 2).
• Check that it is firmly armed.
1
02

FRONT WHEELS INSTALLATION

• Insert each of the wheels into the
front axle until you hear a "click". This
sound will indicate that they are
correctly positioned.
• To remove them, press with one
hand, the steel dismounting button
located at the bottom of the axle; with
the other hand, remove the wheel
(Fig. 3).
12
2
3
03

REAR WHEELS INSTALLATION

• As shown in Fig. 4, insert each of the wheels into the rear axle until you
hear a "click".
• Make sure they are locked and cannot be removed.
• To remove the rear wheels, press the steel tab on the rear of the axle.
You will find one for each wheel. Help yourself with the other hand to
remove the wheel from the side.
4
04

FRONT WHEELS ALIGNMENT

• Move the fixing piece to the right and left to lock and unlock the front
wheels (Fig. 5).
• If the locks at the rear of the wheels are pointed outward, then the front
wheels will be held in a fixed position.
• Otherwise, if they are inwards, the wheels will rotate on their axis, back
and forth, randomly.
5
13