Publicidad
Idiomas disponibles
Idiomas disponibles
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
It is possible to power link up to 7 Intimidator Spot 260X products on 120 V or 11 products on 230 V. Never exceed this
number. Power-linking cords can be purchased separately.
Fuse Replacement
1. Disconnect the product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Safety cable
(such as CH-05 from
Chauvet)
Control Panel Description
Button
Function
<MENU>
Exits from the current menu or function
<UP>
Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER>
Enables the currently displayed menu or sets the currently selected value into the selected function
Intimidator Spot 260X QRG Rev. 1
QUICK REFERENCE GUIDE
Safety
Notes.
Mounting clamp
(such as CLP-15 from Chauvet)
Hanging bracket
Feet for surface
mounting (x4)
EN
2
Publicidad
