Troubleshooting - Tineco PURE ONE S15 Serie Manual De Uso

Install the clean filters back into the main body,
then close the dustbin flap.
Fig.E-5
HEPA Filter
1.Pull out the HEPA filter (in magnetic design) for
cleaning. Do not use the appliance without first
installing the HEPA filter.
Fig.E-6
2.The HEPA filter can be washed under cold
running water and must be completely dry
before reinstalling.
Fig.E-7
Dust Sensor
• To avoid dust accumulation which can affect
cleaning performance, wipe the suction mouth
with a damp cloth.
Fig.E-8
Brush Head
1.Slide the switch to open the brush roller end
cover, and rotate it clockwise to be able to pull
out the brush roller.
Fig.E-9
2.After removing the brush roller, gently clean
the brush window, suction mouth and the row
of plastic teeth.
Fig.E-10
3.Fully reinsert the brush roller into the brush
window and the end cover can be rotated
counter-clockwise until it clicks securely back
into place.
Fig.E-11
Warning:
• The power brush contains electrical
components which must not be soaked or
washed with water.
• Turn the power off and remove the battery
before performing maintenance for the brush
roller.
• To reduce the injury, do not touch the brush
roller while the appliance is in working
condition.

TROUBLESHOOTING

Problem
The appliance does
not turn on
Weak suction power
Abnormal sounds or
plastic teeth tangled
in brush
Suction mouth blocked
Battery won't charge
Brush roller tangled
indicator blinking
Power indicator
blinking
Air channel blocked
indicator blinking
Dust sensor
malfunction indicator
blinking
22
Solution
Charge the battery
Restart after cooling
down
Check and remove
blockages
Clean the dustbin and
filters
Install the pre-filter
Remove blockages
Clean the brush roller
Pull out the brush roller
and remove blockages
Remove the mesh
filter, clean the suction
mouth and dustbin
Reinsert the adaptor
correctly
Check the main
body and battery are
correctly placed
Use the original
adaptor
Remove blockages
Remove blockages, or
restart
Remove blockages
Clean the dust on the
inner sensor
Install the dustbin
correctly