Noise And Vibration Data; Maintenance And Repairs - Stihl HSE 61 Manual De Instrucciones

English
13.4

Noise and Vibration Data

Noise and vibration data are determined on the
basis of the rated maximum speed.
For further details on compliance with Vibration
Directive 2002/44/EC see www.stihl.com/vib/
13.4.1 Sound pressure level L
EN 60745‑2‑15
HSE 61
500 mm blade:
600 mm blade:
HSE 71
600 mm blade:
700 mm blade:
HSE 81
500 mm blade:
600 mm blade:
700 mm blade:
13.4.2 Sound power level L
EN 60745‑2‑15
HSE 61
500 mm blade:
600 mm blade:
HSE 71
600 mm blade:
700 mm blade:
HSE 81
500 mm blade:
600 mm blade:
700 mm blade:
13.4.3 Vibration measurement a
EN 60745‑2‑15
HSE 61
500 mm blade:
Left handle:
Right handle:
HSE 61
600 mm blade:
Left handle:
Right handle:
HSE 71
600 mm blade:
Left handle:
Right handle:
HSE 71
700 mm blade:
Left handle:
Right handle:
HSE 81
500 mm blade:
Left handle:
30
to
p
85 dB(A)
85 dB(A)
88 dB(A)
88 dB(A)
88 dB(A)
88 dB(A)
88 dB(A)
to
w
96 dB(A)
96 dB(A)
99 dB(A)
99 dB(A)
99 dB(A)
99 dB(A)
99 dB(A)
to
hv
2
5.3 m/s
2
3.3 m/s
2
5.3 m/s
2
3.3 m/s
2
3.8 m/s
2
2.6 m/s
2
3.8 m/s
2
2.6 m/s
2
3.2 m/s

14 Maintenance and Repairs

HSE 81
500 mm blade:
Right handle:
HSE 81
600 mm blade:
Left handle:
Right handle:
HSE 81
700 mm blade:
Left handle:
Right handle:
The K‑factor in accordance with Directive
2006/42/EC is 2.0 dB(A) for the sound pressure
level and sound power level; the K‑factor in
accordance with Directive 2006/42/EC is
2
2.0 m/s for the vibration level.
The vibration values quoted above have been
measured according to a standardized test pro‐
cedure and may be used to compare electric
power tools.
Depending on the type of usage, the vibrations
that actually occur may differ from the values
quoted.
The vibration values quoted may be used for an
initial assessment of the user's exposure to
vibrations.
The actual exposure to vibrations has to be eval‐
uated. This process may also take into account
times during which the electric power tool is
switched off and times during which it is switched
on but running without load.
Observe measures to reduce vibration exposure
to protect the user – see section on "Vibrations"
in chapter on "Safety Precautions and Working
Techniques".
13.5 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation (EC) No. 1907/2006 see
www.stihl.com/reach.
14 Maintenance and Repairs
Users of this machine may only carry out the
maintenance and service work described in this
user manual. All other repairs must be carried
out by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
2
2.1 m/s
2
3.5 m/s
2
2.5 m/s
2
3.5 m/s
2
2.5 m/s
0458-279-9821-E