universalblue UVP1200-20 Manual De Instrucciones página 24

Remote control
 Place the fan on a flat, stable surface and connect it to the
power outlet.
 Press 'ON / SPEED' on fan's body or on the remote control to
turn on the fan.
 Press 'OFF' on fan's body or on the remote control to turn off
the fan.
 Adjusting the air flow speed by pressing the "SPEED" button
on the control panel or the supplied remote control and the
fan will go through 3 speeds (Low / Medium / High). The low
speed has been expressly designed for the hours of sleep.
 Adjust the fan oscillation by pressing the 'SWING' button to
start or stop the oscillation. Pressing the 'SWING' button
once, the fan will oscillate horizontally. If you press again the
oscillation will stop.
 Timer setting by pressing the 'TIMER' button on the control
panel or the supplied remote control. The timer can be
programmed in intervals of 0.5 hours and up to a maximum
of 7.5 hours. The display will show the programming time in
each case. Once the time runs out, the fan will turn off
automatically.
24