Master Trimmers MT Dry 200 Manual De Uso Y Mantenimiento página 29

5. Unhook the ends of the blade, as shown in the following images, from the two holders with hooks located inside
the machine so that it can be removed and cleaned.
6. Remove the engine block from the machine. To do this, first loosen the clamping knob without removing it and
move it along the groove, as shown in the following image. Once the final position has been reached, fix it again by
turning it clockwise.
7. With one hand on the upper handle of the motor bracket and the other on the lower part of the motor itself,
move the block upwards until the lower flange of the bracket overlaps the frame window. Then, remove the unit
as shown in the following image.
29
www.masterproducts.es