Becken BSF2771 Manual De Instrucciones página 10

Operation
• Place the fan on a flat and stable surface. Ensure the fan is in a
secure position so that it cannot tip over or fall.
• Connect the appliance to an electrical socket that is in a good
condition. Ensure the mains voltage is compatible with that shown
on the appliance.
• To start the appliance, press the control panel button or use the
remote control.
• The fan can operate the following speed:
1
• To adjust the speed of the fan, press the Speed button on the fan
control panel or the +/- button on the remote control.
• Press the button marked OSC on the control panel or remote control
to make the fan rotate. Press this button again to stop rotation.
• This fan has a Timer function. Using this function enables the fan
to switch off automatically at the end of a set time. The set time can
vary from 1 to 15 hours. To set the time, repeatedly press the button
on the control panel or on the remote control. The selected number
of hours is displayed by the pilot light corresponding to the set time.
To deactivate the timer function, press the timer button until the
corresponding indicator switches off.
• The fan has a NATURAL mode. This mode alternates the speed
of the fan from minimum to maximum speed. To select this mode,
press the button marked Mode on the control panel or on the
remote control until the corresponding pilot light appears.
• The fan has a BREEZE mode. This mode consists of maintaining
a lower air flow that reduces the noise of the fan.
10
AF Manual VENTOINHA PÉ BSF2771 A5 EN.indd 10
2 3 4 5 6 1
31/03/17 18:45