Operating Instructions - Klarstein PASSAU Manual De Instrucciones

OPERATING INSTRUCTIONS

Step 1
Take out the ice basket and add water to the water tank. Note: There is a
maximum scale MAX in the reservoir. The water should not exceed the MAX
position. If the water exceeds the maximum scale MAX, you need to open the
bottom drain plug, release the excess water, and reinstall the water tank.
Step 2
Plug in the power and press the POWER button to start the machine.
Step 3
Select the size of the ice you want to make, the default mode is large ice.
Notes
1. When the indoor temperature is lower than 20 degrees, please choose
small ice. When the indoor temperature is higher than 30 degrees, it is
recommended to choose large ice.
2. The three cycles used for the first time, the ice produced is small and irregular.
3. When the ice basket is full, please take out the ice immediately. The ice will
melt if the time is too long.
EN
21