Publicidad
Idiomas disponibles
Idiomas disponibles
2.3 Technical data
Operating voltage / V
Mains frequency / Hz
Input power / W
Nominal current / A
Supply voltage / V*
Control voltage for speed specification / V*
Display remaining runtime / V*
Power consumption / mA*
Idling speed / rpm
-1
Tool holding fixture with collet Ø / mm
Tool shank / mm
Milling cutter Ø, max. / mm
Grinding tool Ø, max. / mm
Weight without mains cable / kg
Length of connecting cable / m
Dimensions (W x L x H) / mm
* Specifications for the portal interface (PV interface)
2.4 Emissions
The declared noise emission values have been measured in accordance with DIN EN 62841-1 and may be used
for comparing the tool with another and also in a preliminary assessment of exposure.
2.4.1
Noise emission specifications
Noise emission values determined according to DIN EN ISO 3744:
Sound pressure level
The noise measurement was done without tool at idling speed.
Danger
The noise emissions during actual use of the power tool can differ from the declared
values depending on the ways in which the tool is used especially what kind of
workpiece is processed.
Always wear hearing protection, even when the power tool ist running idle in addition
to the trigger time!
L
= 81.9 dB (A)
PA
-25-
FM 1650 PV-LO
230
50
1650
7.2
8 - 56
0 - 10
0 - 5
3 - 5
4000 – 23000
8
3 - 12.7
60
60
3.22
4
98.4 x 85.6 x 346
Publicidad
