Installing The Bidet Attachment - brondell SMB-15 Manual Del Propietário

PRODUCT INSTALLATION

Installing the Bidet Attachment

1. Install mounting guide bolt into middle opening (1a) of
bidet attachment bracket. For one-piece or skirted toilets,
install mounting guide bolt into outside opening (1b) of
bidet attachment bracket.
2. Install Bidet Attachment On Toilet.
a. Place bidet attachment on the toilet, making sure to
insert mounting guide bolt into toilet bolt opening.
b. Secure bidet attachment to toilet bowl using small
rubber washer, metal washer, and metal nut.
c. Before tightening nut completely, use the nozzle
control handle to move spray wand to full extension.
Adjust bracket and control valve body until the spray
wand head is positioned in the center of the toilet
bowl, or in an alternative desired position. Gently
retract spray wand to ensure it sits just beneath toilet
bowl rim. Hand-tighten the metal nut until fully secured.
CAUTION: Avoid over-tightening, as damage may occur.
d. Place mounting washer over opposite toilet bolt
opening.
e. Replace the toilet seat on top of bidet attachment and
secure using original toilet seat hardware.
Attachment Bracket
Control Valve Body
Spray Wand
(1a) (1b)
Step 1
Step 2a
Step 2b
Step 2c
Step 2d
Step 2e
7