Maintenance, Storage; Environmental Protection - ST R72 Li 48 V1 Manual De Instrucciones

3.4 MAINTENANCE, STORAGE

Ensure regular maintenance and correct
storage to maintain machine safety
and high performance levels.
Maintenance
• Never use the machine with worn or
damaged parts. Faulty or worn-out parts must
always be replaced and never repaired.
• Be careful during adjustment of the
machine to prevent entrapment of the
fingers between moving parts of the cutting
means and fixed parts of the machine.
• Have your machine serviced by a
qualified repair person using only identical
replacement parts. This will ensure that
the safety of the machine is maintained.
• Do not attempt to repair batteries. Repairs
must be carried out by the manufacturer
or by a specialized service centre.
SAFETY INSTRUCTION
The noise and vibration levels shown in these
instructions are the maximum levels when using
the machine. The use of an unbalanced cutting
element, the excessive speed of movement, or
the absence of maintenance have a significant
influence on noise emissions and vibrations.
Consequently, it is necessary to take preventive
steps to eliminate possible damage due to
high levels of noise and stress from vibration;
maintain the machine well, wear ear protection
devices, and take breaks whilst working.
Storage
To reduce fire risks, do not leave
containers with debris inside a room.

3.5 ENVIRONMENTAL PROTECTION

Protecting the environment must be a
significant and top priority for machine
use, to the benefit of civil co-habitation
and of the environment that we live in.
• Scrupulously comply with local regulations
for the disposal of packaging, deteriorated
parts or any elements with a strong
environmental impact; this waste must
not be disposed of with regular waste, but
must be separated and taken to collection
centres, which will recycle the materials.
• Comply with local regulations for
the disposal of waste materials.
• When the machine is withdrawn from service,
do not dispose of it in the environment,
but take it to a waste disposal facility in
accordance with the local regulations in force.
Do not throw electrical equipment away
with domestic waste. According to the
European Directive 2012/19/EU on
electrical and electronic equipment
waste and its implementation in
compliance with national standards, old electrical
equipment must be collected separately, for eco-
compatible recycling. If electrical equipment is
disposed of in dumps or in landfills, hazardous
substances can leak into the groundwater and
contaminate the food chain, damaging your
health and well-being. For further information on
the disposal of this product, contact your dealer
or a domestic waste collection service.
At the end of their working life, dispose of
batteries with all due care and in
compliance with applicable local
legislation. Batteries contain materials
classified as hazardous for people and
the environment. They must be removed and
disposed of separately at a facility that accepts
lithium-ion batteries.
Separate waste collection of the products
and packaging used allows the materials
to be recycled and reused. Reuse of
recycled materials help to prevent
environmental pollution and reduces the
demand for raw materials.
EN - 7