Grandstream GXV3470 Guía De Instalación Rápida página 4

PHONE SETUP:
Wall Mount
Dekstop
bracket screws
Installing the Phone (Wall Mount *Sold seperately):
1. Remove the desktop bracket by unscrewing the 4 screws with a philips
head screwdriver.
2. Attach the wall mount to the slots on the back of the phone.
3. Attach the phone to the wall via the wall mount hole.
4. Pull out the tab from the handset cradle (see figure below).
5. Rotate the tab and plug it back into the slot with the extension up to hold
the handset while the phone is mounted on the wall.
Wall mount
Using the Phone Stand:
For installing the phone on the table with the phone stand, attach the phone
stand by screwing the 4 screws on the upper half side using a philips head
screwdriver (see figure below).
~ 3 ~
CONNECTING THE PHONE:
1. Connect the handset and main phone case with the phone cord.
2. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or
Slots for
wall mount
3. Connect the 12V DC output plug to the power jack on the phone; plug the
spacers and
phone stand.
4. The LCD will display booting up or firmware upgrading information. Before
5. Using the web configuration interface or from the menu of the touch screen,
3.5mm Headset Port
Handset Rest
*USB enabled only when power
supply or PoE+ is used
Tab with
Tips for using the
extension up
GXV3470 Keys:
Tab with
extension down
1. Tap on VOLUME DOWN / UP keys to adjust volume on the phone.
2. Tap on HOME key to return to the default idle screen. Or press and hold on
3. Press MENU key to access phone's display settings, edit widgets and
4. Press BACK key to go back to the previous menu.
a router (LAN side of the router) using the Ethernet cable.
power adapter into an electrical outlet. If PoE switch is used in step 2, this
step could be skipped.
continuing, please wait for the main screen display to show up.
you can further configure network connection using static IP, DHCP... etc.
*USB Port
HDMI OUT Port
Kensington lock
Reset Hole
PC Port
HOME
VOLUME UP
VOLUME DOWN
the HOME key for 2 seconds to take a screenshot.
thread manager. Or press and hold on the MENU key for 2 seconds to
enter managing application interface directly.
~ 4 ~
LAN Port RJ9 Headset
Power Handset
Port
Port
MESSAGE
WAITING
INDICATOR
MENU
BACK