Descargar Imprimir esta página

Safe Operation Practices - Craftsman 247.25003 Manual Del Operador

Ocultar thumbs Ver también para 247.25003:

Publicidad

CHILDREN
Tragic accidents can occur if the operator is not alert to the presence
of children. Children are often attracted to the machine and the mowing
activity. They do not understand the dangers. Never assume that
children will remain where you last saw them.
Keep children out of the mowing area and in watchful care of a
responsible adult other than the operator.
Be alert and turn machine off if a child enters the area.
To avoid back-over accidents, always look behind and down for
small children.
Never carry children, even with the blade(s) shut off. They may
fall off and be seriously injured or interfere with safe machine
operation.
Use extreme care when approaching blind corners, doorways,
shrubs, trees or other objects that may block your vision of a child
who may run into the path of the machine.
Keep children away from hot or running engines. They can suffer
burns from a hot muffler.
Remove key when machine is unattended to prevent unauthorized
operation.
Never allow children under 14 years of age to operate this machine.
Children 14 and over should read and understand the instructions and
safe operation practices in this manual and on the machine and should
be trained and supervised by an adult.
TOWING
Tow only with a machine that has a hitch designed for towing. Do
not attach towed equipment except at the hitch point.
Follow the manufacturers recommendation for weight limits for
towed equipment and towing on slopes.
Never allow children or others in or on towed equipment.
On slopes, the weight of the towed equipment may cause loss of
traction and loss of control.
Travel slowly and allow extra distance to stop.
Do not shift to neutral and coast downhill.
SAFETY INSTRUCTIONS
SERVICE
Safe Handling of Gasoline
To avoid personal injury or property damage use extreme care in
handling gasoline. Gasoline is extremely flammable and the vapors are
explosive. Serious personal injury can occur when gasoline is spilled
on yourself or your clothes which can ignite. Wash your skin and
change clothes immediately.
General Service
5
Use only an approved gasoline container.
Extinguish all cigarettes, cigars, pipes and other sources of ignition.
Never fuel machine indoors.
Never remove gas cap or add fuel while the engine is hot or run-
ning. Allow engine to cool at least two minutes before refueling.
Never over fill fuel tank. Fill tank to no more than ½ inch below
bottom of filler neck to allow space for fuel expansion.
Replace gasoline cap and tighten securely.
If gasoline is spilled, wipe it off the engine and equipment. Move
machine to another area. Wait 5 minutes before starting the engine.
To reduce fire hazards, keep machine free of grass, leaves, or
other debris build-up. Clean up oil or fuel spillage and remove any
fuel soaked debris.
Never store or re-fuel the machine or fuel container inside where
there is an open flame, spark or pilot light as on a water heater,
space heater, furnace, clothes dryer or other gas appliances.
Allow a machine to cool at least five minutes before storing.
Avoid Static Discharge.
Never fill containers inside a vehicle or on a truck or trailer bed
with a plastic liner. Always place containers on the ground away
from your vehicle before filling.
When practical, remove gas-powered equipment from the truck
or trailer and refuel it on the ground. If this is not possible, then
refuel such equipment on a trailer with a portable container, rather
than from a gasoline dispenser nozzle.
Keep the nozzle in contact with the rim of the fuel tank or
container opening at all times until fueling is complete. Do not use
a nozzle lock-open device.
Never run an engine indoors or in a poorly ventilated area. Engine
exhaust contains carbon monoxide, an odorless, and deadly gas.
Before cleaning, repairing, or inspecting, make certain the
blade(s) and all moving parts have stopped. Disconnect the spark
plug wire and ground against the engine to prevent unintended
starting.
Periodically check to make sure the blades come to complete stop
within approximately (5) five seconds after operating the blade
disengagement control. If the blades do not stop within the this
time frame, ave your machine serviced professionally by Sears or
another qualified dealer.
Regularly check the safety interlock system for proper function, as
described later in this manual. If the safety interlock system does
not function properly, have your machine serviced professionally
by Sears or another qualified dealer.

Publicidad

Solución de problemas

loading