Publicidad
Step 1(Basic assembly of the fan)
Assembly
Align the blades with the mounting holes,
①
and then fix them with screws.
Step 1(Basic assembly of the fan)
Align the blades with the mounting holes,
①
and then fix them with screws.
1
Align the blades with the mounting holes, and then fix them with screws.
Desmonte la tija
Démontez la tige
3
Step 2 (Ceiling bracket installation and fan into the installed Bracket.)
Turn off the fan power supply at the circuit
breaker box and the wall switch. If it is a
①
cement roof, please drill the installation
hole at the installation location.
Off
Important!
¡Importante!
Important !
Snap the basically assembled fan into the
③
installed Bracket.
5
Click!
buckle
Step 3 (Receiver installation and wiring)
Step 3 (Receiver installation and wiring)
Install the fan in the bracket,
Connect the wires according to the polarity (the color of the
①
Instala el soporte del ventilador,
House power cord may be different if the color is the same).
Installez le support du ventilateur.
AC IN N(Blue)
AC IN L(Brown)
Ground(Yellow/Green)
Montaje
Assembly Instructions
Assembly Instructions
②
OFF
or
.2.
House power
OK
②
OK
②
2
Step 2 (Ceiling bracket installation and fan into the installed B
Turn off the fan power supply at the circuit
breaker box and the wall switch. If it is a
①
cement roof, please drill the installation
hole at the installation location.
4
Can be installed on <15º sloped roof.
Choose the following installation methods
according to the actual situation of the roof.
Snap the basically assembled fan into the
③
installed Bracket.
Click!
buckle
Tighten the 2 screws.
Apriete los 2 tornillos.
Serrez les 2 vis.
Step 3 (Receiver installation and wiring)
Step 3 (Receiver installation and wiring)
Connect the wires according to the polarity (the color of the
①
House power cord may be different if the color is the same).
6
AC IN N(Blue)
AC IN L(Brown)
Ground(Yellow/Green)
Receiver
L1 To Motor(Brown)
L2 For light(Red)
N Neutral(Blue)
Ground(Yellow/green)
.2.
Make the connections. If in doubt, consult a technician
Put the receiver into the
②
Haz las conexiones. Si tienes dudas consulta a un técnico.
Bracket and arrange the wires
Faites les connexions. En cas de doute, consultez un technicien.
Montage
Assembly Instructions
②
OFF
or
Cement roof
Solid wood roof
House power
FAN
.3.
Can be installed on <
Choose the following
according to the actua
Put the
②
Bracke
Adjust
③
then lo
Publicidad
