Publicidad
Idiomas disponibles
Idiomas disponibles
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the
battery charger is not damaged and that there
are no cracks in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a
dry cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery
and the battery charger are clean before the
battery is put in the battery charger or the
product.
To replace the trimmer line
1. Hold the lower half (A) of the trimmer head
stable with one hand.
2. Use your opposite hand to turn the top half (B)
of the trimmer head clockwise.
3. Continue to turn the top half of the trimmer
head until the triangles (C) align.
C
1511 - 009 - 07.07.2022
4. Remove and discard the remaining trimmer
5. Cut approximately 5.5 m/18 ft of new trimmer
6. Put one end of the trimmer line into one of the
7. Push the trimmer line through the trimmer
8. Pull the trimmer line through the trimmer head
9. Hold the trimmer head lower half stable with
10.Use your opposite hand to turn the top half
B
A
11.Continue to turn the knob until approximately
line, if there is.
line.
holes.
head and through the opposite hole.
until there is an equal length of trimmer line on
each side.
one hand.
counterclockwise.
127 mm/5 in of trimmer line is extended from
each hole.
X
X
19
Publicidad
Solución de problemas
