Descargar Imprimir esta página

English - EGAmaster 51108 Manual De Instrucciones

Ocultar thumbs Ver también para 51108:

Publicidad

Idiomas disponibles

Idiomas disponibles

CAPACITY
1 Ton
Always use Engine Crane!
Always follow safety precautions when installing and operating this equipment. Keep all
decals on the unit clean and visible.
Before proceeding ensure that you fully understand and comprehend the full contents of this
manual. Failure to operate this equipment as directed may cause injury or death. The distributor
is not responsible for any damages or injury causedby improper use or neglect.
WARNING!
DANGER
• Inspect the equipment carefully before each use. Ensure the equipment is not damaged,
excessively worn, or missing parts.
• Do not use the equipment unless it is properly lubricated.
• Using equipment that is not in good clean working condition or properly lubricated may
cause serious injury.
• Inspect the work area before each use. Make sure it is free and clear of any potential
hazards.
DO NOT OPERATE OR REPAIR THIS EQUIPMENT WITHOUT READING THIS MANUAL.
To maintain the equipment and user safety, the responsibility of the owner is to read and
follow these instructions.
• Inspect the equipment for proper operation and function.
• Keep instructions readily available for equipment operators.
• Make certain all equipment operators are properly trained; understand how to safely and
correctly operate the unit.
• Allow unit operation only with all parts in place and operating properly.
• Use only genuine replacement parts.
• Service and maintain the unit only with authorized or approved replacement parts;
negligence will make the equipment unsafe for use and void the warranty.
• Carefully inspect the unit on a regular basis and perform all maintenance as required.
SPECIFICATION
Min. Height (mm)
25
DO NOT CLIMB, HANG OR SWING. MISUSE
OF ENGINE CRANE COULD RESULT IN A FALL
THAT MAY RESULT I SEVERE INJURY!
KEEP OFF
INSPECTION
Max. Height (mm)
2040
NO CLIMBING

ENGLISH

N.W. (kgs)
65
9

Publicidad

loading