ENGLISH
4. The battery pack should be recharged when
it fails to produce sufficient power on jobs
which were easily done previously. DO NOT
CONTINUE to use under these conditions. Follow
the charging procedure. You may also charge a
partially used pack whenever you desire with no
adverse effect on the battery pack.
5. Foreign materials of a conductive nature such
as, but not limited to, grinding dust, metal
chips, steel wool, aluminum foil, or any buildup
of metallic particles should be kept away from
charger cavities. Always unplug the charger
from the power supply when there is no battery
pack in the cavity. Unplug the charger before
attempting to clean.
6. Do not freeze or immerse the charger in water or
any other liquid.
Storage Recommendations
1. The best storage place is one that is cool and
dry, away from direct sunlight and excess heat
or cold.
2. For long storage, it is recommended to store a
fully charged battery pack in a cool dry place out
of the charger for optimal results.
NOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be
recharged before use.
10
Package Contents
A
H
K
J
N
A Sprayer
B Shut-off
Assembly
D Cap Nut
E Flat Seal
G Harness
H Battery
J Foaming
K High-Volume
Nozzle
Wide Fan
(Black)
Nozzle
(Brown)
M Low-Volume
N Jet Stream
Narrow
Nozzle
Fan Nozzle
(Orange)
(Yellow)
B
C
D
E
F
G
I
M
L
O
C Wand
F Nozzle
Storage Clip
I Battery
Charger
L Low-Volume
Wide Fan
Nozzle (Red)
O Adjustable
Cone Nozzle