Thomasville Messina 523125 Instrucciones De Montaje página 2

Assembly Instructions
1. Install one of the seat frames (A) on the loveseat base & arm assembly (B) by aligning the holes in the "U" bar, located
underneath the seat frame, with the holes in the metal spring plates that are attached to the base & arm assembly. Attach
each seat frame (A) using the four screws (C), four metal plates (E), four spring washers (D), and four nuts (F) as indicated.
Note that two of the metal plates go on top of the "U" bar and the other two go below each of the metal spring plates.
Insert and start all four screws before completely tightening. Once all four screws are inserted, tighten each screw using the
hex wrench-1 (H) and hex wrench-2 (I). After securely tightening all four screws and nuts, install the PVC hex head screw
covers (G). See Figure 1.
Repeat these steps to attach the other seat frame (A).
Page 3 of 7
All manuals and user guides at all-guides.com
Messina
Loveseat, Sofa, & Corner Table
Figure 1
! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE !
TM 4 - Piece Sectional Model #: 523125
Model #: 523129