Loewe 52 SL Instrucciones De Servicio página 21

TECHNICAL CUSTOMER SERVICE
1.3 Unscrewing the connecting screws from the support plate
The three T20 Torx screws, which are shown by green arrows in fig. 4 and fig. 5, can then be
removed from the support plate.
The two screws on the signal board are located on its lower corners and are shown by white
arrows in fig. 4 and fig. 5.
Fig. 4
1.4 Unfastening the cable harnesses
Remove the SATA connection and the power supply for the hard disc on the signal board (see
fig. 6) and pull the power socket out of the support plate (see fig. 7).
Fig. 6
Fig. 5
Fig. 7
21
Loewe Opta GmbH
96317 Kronach, Industriestr. 11
96305 Kronach, Postfach 15 54
Telefon (0 92 61) 99-0
Telefax (0 92 61) 99-730
e-mail: loewe@loewe.de
www.loewe.de