Stihl FC-MM Manual De Instrucciones página 13

English / USA
: Inspect the work area and clear
away any solid objects to reduce the
risk of injury.
: Plan the the best route for edging.
Operate the MultiEngine with FC-MM
edger in the forwards direction only.
The blade may only be mounted and
operated in one position. Arrows on the
blade indicate the correct direction of
rotation – see "Mounting the MultiTool".
12
Never work without the deflector!
The deflector is designed to direct
cuttings and other debris away from the
machine and operator.
Edging
90°
: Start the engine.
: Start the cut at no less than half
throttle and continue cutting at full
throttle.
: Hold and guide your edger so that
the blade is vertical.
: Cut steadily so that the engine is not
lugged down – do not use excessive
feed force.
: Cut at a normal walking pace.
FC-MM