Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Note: If no DAB station has been stored under the preset location, 'Empty'
will be displayed, then the Retro Turntable will revert to the previously
selected radio station.
DAB display information
When listening to a DAB station you can change the information that will
appear on the display. There are several different types of information that
are sent by the broadcaster.
Dynamic Label Segment (DLS)
This is scrolling text information supplied by the broadcaster. Information
could be the name of an artist or music title, DJ's name, contact details for
the radio station etc.
Signal Strength
An empty rectangular will appear on the display to indicate the minimum
signal strength for acceptable listening. The row of solid rectangles indicate
the actual signal strength that you are receiving. The stronger the signal, the
further to the right the row of solid rectangles will be.
Programme Type (PTY)
Such as "FLAT", "CLASSIC", "POP", "JAZZ", "ROCK" or "BASS".
Multiplex Name
Displays the broadcasting area and collection of radio stations on
this frequency e.g.: BBC National DAB, Digital 1 Network
Channel and Frequency - e.g.: 12B 225.648 MHz
Signal error
This is displayed as a number between 0-99. It would not be possible to
satisfactorily listen to a radio station with a signal error rate of 30 or above.
Try adjusting the aerial or relocating your radio to improve reception.
Signal information
The data rate at which the signal is being transmitted.Repeatedly short
press the Stop button on the Retro Turntable or the Info button on remote
control to cycle through the different information options.
48
Publicidad
