Publicidad
Idiomas disponibles
Idiomas disponibles
FIG. 2
2. Lay out the wood parts in their approximate locations to aid in the identification and
assembly.
FIG. 3
READ RAFIX ATTACHMENT SYSTEM INSTRUCTIONS NOW.
3. Remove the existing crown off the hutch by loosening the Rafix Cams and sliding the
Rafix Bolts out of the cams.
FIG. 4A
4. At each end of the Front Crown Molding (A) insert a Corner Support (B) into the groove
in the back of the molding. Position the Corner Support (B) so that at least 1/8" of the
groove is showing at each end of the Front Crown Molding (A). DO NOT GLUE the Corner
Supports (B) in place. See FIGURE 4B.
233W Standard Wrap Crown
Kit and 226W Standard
3-Shelf Hutch shown in all
drawings.
FIG. 4B
233W/244W — Page 3
Publicidad
