Wireless Remote Control - Avidsen 100720 Manual De Instrucciones

Wireless remote control

Use the remote control to arm/disarm the central unit and set the SOS emergency status.
PIR Wireless Sensor
The motion detector uses fuzzy logic for an intelligent analysis of surveillance areas. This
technology detects interference generated by the moving body thus reducing false alarms
rate. With automatic temperature compensation technology, it easily adapts to environmental
changes. Has a detection range of up to 8m and a detection angle of up to 110°.
12
GB
ARM: Press the Arm button to arm the alarm. The central unit will beep
to acknowledge the receipt of the command.
DISARM: Press Disarm to disarm the alarm system. The central unit will
beep twice to the acknowledge receipt of the command.
HOME: Press the Home button to arm the alarm system in Home
mode. The central unit will beep twice to acknowledge the receipt of
the command.
SOS: The SOS button starts the emergency scenario and at the same
time, the central unit will send an SMS notification (e.g. "RC-01 SOS",
where 01 is the remote control number) to all the preset phone numbers
and will start to call.
110°
Top view
Detection range
0mt 2mt
2mt
0mt
4mt 6mt 8mt
Side view