Electrical Connection; Establishing The Power Supply - welltherm WS Manual De Instalacion Y Uso

4 - Electrical connection

4.1 - Establishing the
power supply
Observe the
Ecodesign Directive
Specifi cation:
wireless plug socket receiver
X3D
Specifi cation:
wireless receiver X3D
Caution! Risk of material damage due to excessive connection voltage!
Electronic components
es over 253 volts. Ensure that the rated voltage of the mains is
230 volts.
The infrared heater has a three-wire connecting cable with a length of
1.9 m, on the end of which a shockproof plug is fi tted.
In accordance with the EU Ecodesign Directive 2009/125/EC - substan-
tiated in the Regulation 2015/1188 for the product range of local space
heaters - this infrared heater can only be operated as a stationary local
space heater, if certain requirements for control/regulation are fulfi lled.
More detailed information can be found, for example, on the Internet at:
- https://www.umweltbundesamt.de/themen/wirtschaft-konsum/pro
dukte/oekodesign/oekodesign-richtlinie
- http://eur-lex.europa.eu/legal-content/DE/ALL/?uri=CE
LEX%3A32015R1188
Welltherm GmbH off ers a series of control components to fulfi l the re-
quirements specifi ed above and for easy operation of this infrared heater.
We will subsequently look at the electrical connection of these compo-
nents.
Insert the heater's shockproof plug into the wireless plug socket receiver
X3D for the power supply.
Attention! The optionally
must only be electrically
- Connect the phase conductor(live) of the mains network to terminal 4.
- Connect the neutral wire of the mains network to terminal 3.
- Connect terminal 2 to the blue connection cable
of the infrared heater.
- Connect terminal 1 to the brown connection cable
of the infrared heater.
- Connect the earth line of the mains network to the yellow-green
connection cable of the infrared heater.
can be destroyed with
available wireless
connected by qualifi ed
mains voltag-
receiver X3D
electricians!
33