Assembly - Hart HPSV25 Manual Del Operador

ASSEMBLY

Fully assemble product prior to use.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-776-5191 for assistance.
OPERATION
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the product when
you are assembling parts, making adjustments, clean-
ing, or when not in use. Removing battery pack will
prevent accidental starting that could cause serious
personal injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
WARNING:
D o not put hands or objects inside of beater bar
attachment as this could cause a malfunction of the
tool or risk of injury may occur.
APPLICATIONS
You may use this product for the following purpose:
 Light-duty vacuuming of dry surfaces
 Household type
WARNING:
Do not attempt to modify this product or create ac-
cessories or attachments not recommended for use
with this product. Any such alteration or modification
is misuse and could result in a hazardous condition
leading to possible serious personal injury.
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 9.
Insert the battery pack into the battery port as shown.

Make sure the latch on the battery pack snaps into place

and the battery pack is secured in the product before
beginning operation.
Depress the latch and pull to release and remove the

battery pack.
For complete charging instructions, see the operator's
manuals for your battery pack and charger.
INSTALLING THE WALL MOUNT
See Figure 2, page 9.
Choose the desired location for the wall mount.

Place the mount on the wall at the desired height. Mark

the screw locations. Install the screws and anchors (if
necessary) to mount to the wall.
Store the vacuum by firmly pressing the unit into the wall

mount to secure.
Always ensure the vacuum is securely locked into place.

Certain accessories, batteries, and chargers can be

stored on the wall mount.
STARTING/STOPPING THE VACUUM
See Figure 3, page 9.
 To start the vacuum: press the ON/OFF button.
NOTE: When the vacuum is on, the LED indicator will
light up blue. When the battery charge is low, the LED
indicator will turn RED.
 To stop the vacuum: press the ON/OFF button again.
5 – English