Pioneer KRP-500A Manual De Instrucciones página 8

01 Important user information
Handles at the rear of the display panel
When moving the display panel, ask another person for help and
use the handles attached to the rear of the display panel. Do not
move the display panel by holding only a single handle.
Do not use the handles to hang the product when installing or
carrying the product, for example. Do not use the handles for the
purpose of preventing the product from tilting over.
Fan noise
The rotation speed of the cooling fan motor increases when the
ambient temperature of the Media Receiver becomes high. You
may hear the sound of the fan motor at that time.
To use this product for a long period of time
The Energy Save function can maintain efficiency of the screen for
a long period of time. Setting the Energy Save function to "Mode 1"
is recommended in order to maintain the efficiency of the screen
for a long period of time.
Caution
Panel sticking and after-image lag
Displaying the same images such as still images for a long time
may cause after-image lagging. This may occur in the following two
cases.
After-image lagging due to remaining electrical load
When image patterns with very high peak luminance are displayed
for more than one minute, after-image lagging may occur due to
the remaining electric load. The after-images remaining on the
screen will disappear when moving images are displayed. The time
for the after-images to disappear depends on the luminance of the
still images and the time they had been displayed.
After-image (lag image) due to burning
Avoid displaying the same image on the screen continuously over
a long period of time.
If the same image is displayed continuously for a long period, or for
shorter periods of time over several days, a permanent after-image
may remain on the screen due to burning of the fluorescent
materials. Such images may become less noticeable if moving
images are later displayed, but they will not disappear completely.
Note
• To prevent damage from screen burning this product will
automatically - after a display time of 5 to 10 minutes - turn off
those still images generated by the system itself: the Home
Gallery function and Graphical User Interface elements such
as HOME MENU.
• To prevent screen burning, the display position is automatically
changed imperceptibly when watching images (see Orbiter on
page 43).
8
En
All manuals and user guides at all-guides.com
Preventing damage from screen burning
• We recommend that you enjoy watching images displayed in
• Set the Side Mask detection function to "Mode 1" or "Mode 2",
full screen, except when doing so may result in copyright
infringement (see page 40).
the High Definition 16:9 aspect ratio images containing side
masks will be detected and the side masks will be added
automatically or the image displayed in full screen, leading to
more effective countermeasures taken for the screen burning
(see Detecting side masks on page 41).