Error Codes - Joyor S5 Manual De Usuario

ODO: To clear ODO
In the ODO parameter setting interface, briefly press the
button and then press and hold for 5-6 seconds until the
number is zero.
EN
16

Error Codes

The number corresponding to the multi-function area
represents the corresponding fault content. The specific
status is as follows:
Error
NO. Definition
Code
1 ERRO 1 Motor failure
2 ERRO 2 Accelerator throttle failure
3 ERRO 3 Controller failure
4 ERRO 4 Brake failure
5 ERRO 5 Under voltage protection
Communication failure, the display cannot
6 ERRO 6
receive the output from the controller
Communication failure, the controller
7 ERRO 7
cannot receive the output from the display
EN
17