Product Usage; Assembly/Disassembly - VALBERG 971713 Instrucciones De Uso

B

Product usage

Assembly/Disassembly

WARNING!
• Never use the unit without a dust bag.
• Make sure the unit is switched off and unplugged from the mains socket before
attaching or detaching any tools.
To install a dust bag, press the dust bag release latch and lift up the front cover.
Place the dust bag holder in an upright position.
Slide the cardboard part on the top of the dust bag into the holder.
Push the dust bag holder back into a horizontal position and check that the bag fits
correctly into the dust compartment. Close the front cover.
Align the protruding sections on the flexible hose with the notches on the main unit's
flexible hose-connecting inlet, then push to insert it as far as it will go.
Insert the metal extension tube into the flexible hose.
Adjust the length of the metal extension tube by pushing the metal extension tube button
whilst simultaneously pushing the tube down or pulling it up to the desired length.
Fit one of the tools by inserting it into the metal extension tube or flexible hose.
The floor brush can be used to clean various types of flooring. Press the pedal to
retract the brush - for use on carpets or rugs - or extend it - to clean smooth floors.
The 2-in-1 folding brush can be used folded to reach tight corners and spaces, or
unfolded and used as a brush to clean furniture and upholstery, such as curtains or
cushions.
• Use the metal extension tube to get to hard-to-reach areas.
NOTE: The floor brush may scratch or damage certain types of flooring or carpet.
Make sure to test the surface first before using the brush on delicate surfaces.
Alternatively, you can use the 2-in-1 folding brush, should this be suitable.
To disassemble:
• Check that the unit is switched off and unplug the plug from the mains socket.
Press the cable rewind button to stow away the power cable.
16 EN