en - Warning and Safety instructions
Read the operating instructions carefully before using this adapter.
Keep these operating instructions in a safe place.
Please also read the operating instructions for your washer-
disinfector and pay particular attention to the Warning and Safety
instructions.
The adapter has been approved for the applications stated in these
operating instructions. Applications that go beyond those listed and
use of the adapter with additional nozzles, irrigation sleeves and rinse
fittings from the Miele range of accessories are described in the oper-
ating instructions for the accessories or are to be agreed with Miele.
Conversions, modifications and any other use are not permitted.
New load carriers must be cleaned in the washer-disinfector
without a load prior to first use.
Inspect all mobile units, baskets, modules and inserts as described
in the "Maintenance" section of the operating instructions for your
cleaning machine.
Only items which have been declared by their manufacturer as
suitable for machine reprocessing may be processed. The manufac-
turer's specific reprocessing instructions must be observed.
Disposable instruments must not be put into the machine for
processing.
To clean and disinfect lumened instruments thoroughly from the in-
side, they must be attached to the relevant holders or nozzles on the
injector manifolds. The connectors must not come loose during a
programme sequence.
At the end of every programme sequence, check that the connectors
have not come loose.
Any hollow items that have become disconnected from their
injector nozzles, adapters or holders during processing must be
re-processed.
The last rinse, as a minimum, must be carried out with DI water.
63