Publicidad
Idiomas disponibles
Idiomas disponibles
off again. Check again that all the screws,
bolts and fixings are firmly seated.
Operation
Place the workpiece on to the base plate
against the rear stop
vice
.
41
note: Ensure that the workpiece lies against
the base plate
.
32
cautIOn! danGER Of InJuRY! Ensure
that the length of the workpiece is at least half
the length of the stop
piece may become loose and slide out.
Set the vice
so that the workpiece lines up
41
with the centre of the cutting disc.
Now switch on the angle grinder and press it
down on to the workpiece.
Avoid any backwards movement and apply
even pressure on the workpiece.
cleaning and care
Use a slightly moist, fluff-free cloth when you
are cleaning or polishing the product.
disposal
The packaging is made entirely of recyclable materi-
als, which you may dispose of at local recycling fa-
cilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
16 GB/IE
32
and secure it with the
27
, otherwise the work-
27
Publicidad
