Glowforge Pro Guia Del Usuario página 24

Have two people lift the Glowforge unit out
of the box.
Leave a Little Room
Place the unit with at least an inch of clear space in all directions. Do not block the air
intake on the bottom right side of the Glowforge unit.
Confirm Safety Equipment
Confirm that your safety equipment meets requirements: See Fire Safety, Smoke and
Fume Safety.
Remove Printer Head and Important Orange and Red Bits
We've secured your Glowforge with two foam blocks and several important orange and red bits.
In addition to providing support during travel, the rear foam block also holds your Printer Head.
Remove the tape from the front of
your Glowforge, then ​
lower the front door.
Copyright Glowforge, Inc. 2019
l ​
i ft the lid &
24