Before You Start - Glowforge Pro Guia Del Usuario

Safety
Now, it's time to get serious. Improperly operating the Glowforge unit can cause fire, eye or skin injury
from laser exposure, or exposure to chemicals that may be health hazards. These can result in serious
injury or even death.
Before you start
● Read this manual before using your Glowforge printer, and ensure everyone else who uses it
reads this too.
● Always follow all instructions in this section and in the Glowforge App.
● Children require the supervision and assistance of an adult at all times.
● Do not use your Glowforge printer while under the influence of alcohol or drugs.
● Lasers are subject to regulations and standards, particularly when installed in an educational
institution or place of work. Ensure that you comply with all applicable rules.
● Do not touch the head or arm of the Glowforge unit while the power is on. If you do so by
accident, turn it off, then back on again to prevent the possibility of damage.
● Parts of this product are made of glass that could break under impact. Should that happen,
be careful avoid injury by broken glass pieces.
Copyright Glowforge, Inc. 2019
3