Chauvin Arnoux CA 6161 Guia De Inicio Rapido página 17

MTT APPLICATION SOFTWARE
The MTT (Machine Tester Transfer) application software allows you to:
■ configure the instrument and measurements,
■ start measurements,
■ programme Auto Scripts,
■ transfer the data saved in the instrument to a PC.
Install the MTT application software. Start it
Refer to the user manual for full installation details.
F1
C1 P1 P2 C2
All measurements recorded in the instrument can be transferred to the PC. Transferring data does not erase the saved
data.
To use MTT, refer to its help or user manual.
F2 F3
CA 6163
then connect the instrument to the PC using the USB cable provided.
17
The measurement is displayed as it was
when saved, except that the status bar
is yellow.