Adjusting The Rear Shock Low-Speed Compression Setting; Adjusting The Rear Shock High-Speed Compression Setting - SHERCO 250-300 SE/R 2013 Manual Del Propietário

adjUsTing THe rear sHOCK lOW-sPeed COMPressiOn
seTTing
1
2
adjUsTing THe rear sHOCK HigH-sPeed COMPressiOn
seTTing
All manuals and user guides at all-guides.com
The adjusting screw
speed behavior of the rear shock (sensitivity
Turning the screw clockwise increases the
hydraulic force (and vice versa).
Turn the screw
until it stops and then turn it back the number of
clicks required.
Do not loosen the nut
Low-speed
compression setting
The adjusting screw
speed behaviour of the rear shock (big hits).
Turning the screw clockwise increases the
hydraulic force (and vice versa).
Turn the screw
1 2
wrench until it stops and then back the number of
clicks required.
Do not loosen the nut
High-speed
compression setting
determines the slow
1
clockwise with a screwdriver
1
.
2
Comfort
Standard
Sport
determines the high
1
clockwise with a socket
1
2
Comfort
Standard
Sport
20 clicks
15 clicks
12 clicks
2,5 turns
2 turns
1,5 turns
97