D Devices D ENDO ROTATORY Manual De Instrucciones página 5

1.8 Warnings
operation.
1.8.3 Do not directly or indirectly place this device near heat source.
Operate and store this device in reliable environment.
1.8.4 This device requires special precautions regarding electromag-
netic compatibility (EMC) and must be in strict accordance with the
EMC information for installation and use. Do not use this equipment
especially in the vicinity of fuorescent lamps, radio transmitting de-
vices, remote control devices, handheld and mobile high- frequency
communication devices.
1.8.5 Long time use of Reciprocating Mode may result in motor
handpiece overheat, thus it should be left to cool for use. If the motor
handpiece is overheated frequently, please contact local distributor.
1.8.6 Please use the original contra angle. Otherwise it will not be
used or cause adverse consequences.
1.8.7 Please do not make any changes to the device. Any changes
may violate safety regulations, causing harm to the patient. There
1.8.8 Please use original power adapter. Other power adapter will
result in damage to lithium battery and control circuit.
1.8.9 The motor handpiece cannot be autoclaved. Use disinfectant of
neutral pH value or ethyl alcohol to wipe its surface.
1.8.10 Before the contra angle stopping rotating, do not press the
push cover of contra angle. Otherwise the contra angle will be
broken.
1.8.11 Before the motor handpiece stopping rotating, do not remove
the contra angle. Otherwise the contra angle and the gear inside
motor handpiece will be broken.
before starting the motor handpiece.
-
1.8.14 Error in replacing lithium batteries can lead to unacceptable
risks, so please contact local distributors to replace the battery if
necessary.
1.8.15 Don't place the device in a position diffcult to disconnect
fromthe network power.
1.8.16 Don't maintain the machine while in use.
5