Symbols On The Product - GreenWorks DT40B00 Manual Del Operador

• Maintain Appliance With Care – Keep cutting edge sharp
and clean for best performance and to reduce the risk of
injury. Follow instructions for lubricating and changing
accessories. Inspect appliance cord periodically, and if
damaged, have it repaired by an authorized service
facility. Inspect extension cords periodically and replace
if damaged. Keep handles dry, clean, and free from oil
and grease
• Check Damaged Parts – Before further use of the
appliance, a guard or other part that is damaged should be
carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition that
may affect its operation. A guard or other part that is
damaged should be properly repaired or replaced by an
authorized service center unless indicated elsewhere in
this manual.
• Make sure the power switch is off and the battery pack is
removed before clearing jammed material, making
adjustments, changing accessories, storing or servicing
the appliance. Unexpected actuation of the appliance
while clearing jammed material or servicing may result in
serious personal injury.
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
• Use appliances only with specifically designated battery
packs. Use of any other battery packs may create a risk of
injury and fire.
• When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery
terminal together may cause burns or a fire.
• Do not use a battery pack or appliance that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk
of injury.
• Do not expose a battery pack or appliance to fire or
excessive temperature. Exposure to fire or temperature
above 130°C may cause explosion. The temperature of
130°C can be replaced by the temperature of 265°F.
• Follow all charging instructions and do not charge the
battery pack or appliance outside of the temperature range
specified in the instructions. Charging improperly or at
temperatures outside of the specified range may damage
the battery and increase the risk of fire.
• Have servicing performed by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the product is maintained.
• Do not modify or attempt to repair the appliance or the
battery pack (as applicable) except as indicated in the
instructions for use and care.
• Any other service should be performed by an authorized
service representative.
English
• Only use the correct tine cylinder that matches the
application. Using any other tine cylinder or attachment
may increase the risk of injury.
2.1

SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this mower.
Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
mower better and safer.
Symbol Name
V Volt
A Amperes
Hz Hertz
W Watt
min Minutes
/min Per Minute
Alternating
Current
Direct Current
n o
No Load Speed Rotational speed, at no load
Safety Alert
Eye Protection
WARNING ---
Wet Conditions
Read Opera-
tor's Manual
Maintain Safe-
ty Devices
Look Behind
While Backing
DANGER ---
Keep Hands
and Feet Away
5
Explanation
Voltage
Current
Frequency (cycles per second)
Power
Time
Revolutions, strokes, surface
speed, orbits etc., per minute
Type of current
Type or a characteristic of cur-
rent
Precautions that involve your
safety.
Always wear eye protection
with side shields marked to
comply with ANSI Z87.1 when
operating this equipment.
Do not expose the product to
rain or moist conditions.
To reduce the risk of injury,
user must read and understand
operator's manual before using
this product.
Do not open or remove safety
devices while the tool is run-
ning.
Look down and behind first to
avoid tripping when pulling
back.
To reduce the risk of injury,
keep hands and feet away from
rotating parts. Do not operate
unless discharge cover or grass
bag is in its proper place. If
damaged, replace immediately.
EN