Internal Layout; Internal Layout (Positioning, Adjusting And Removing Components) - F.Bertazzoni Heritage Serie Manual Del Usuario

6. INTERNAL LAYOUT

6.1 Internal Layout (positioning,
adjusting and removing components)
Refrigerator Drawer
Installed on the slide guides with two knurled-head
thumbscrews.
> To remove the drawer, unscrew the thumbscrews.
FlexMode Drawer
The FlexMode drawer can be removed using
the same method used for the refrigerator
drawer, unscrewing
When putting the drawers back in, make certain
the backs of the drawers engage under the clips
on the slide guides.
Ice Tray
Located in the upper
freezer compartment;
it is installed
> When putting it back in after removal, be sure to
reposition it correctly.
70
its thumbscrews.
drawer of the
in some models
using thumbscrews.
Warning
Do not place hands or fingers near the Ice
Maker when it is in operation.
Shelves
The shelves are adjustable and can be easily
repositioned by the user as follows:
> grasp the sides of the shelf and push it upwards
to detach it from the side rails, then pull it outwards.
> lift or lower the shelf to the desired position
> to remove a shelf, you must first slide it up to the
top
Door Shelves
The door shelves can be easily removed for cleaning.
> Grasp the sides of the door shelf and push it
upwards to release it from its seat, then pull it
outwards.
> Reverse the procedure to reinstall.
2
1