Descargar Imprimir esta página

Display Description; Emptying The Dust Container; Battery Installation - Concept VP6130 Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
EN

DISPLAY DESCRIPTION

MIN For a small amount of dirt
AUTO Automatically adjusts the suction power according to
the amount of dirt, if it detects a large amount of dirt,
it switches to MAX, if it detects a small amount of dirt,
it switches to MIN.
MAX Maximum power for a large amount of dirt
Note: If the battery level of the appliance drops below 20 %,
the battery icon will appear on the display (Fig. A).
Note: If the symbol shown in Fig. B appears, switch off the
appliance and clean the filters.
OPERATING INSTRUCTIONS
Vacuum cleaner assembly
Always disconnect the plug out of the electrical outlet before assembling or removing accessories!
1. Insert the suction tube into the hand-held unit of the vacuum cleaner, you will hear a click. To remove the tube from
the hand-held unit, press the lock button and pull to disconnect.
2. Insert the turbo brush into the suction tube, you will hear a click. To remove the turbo brush from the extension
tube, press the lock button and pull to disconnect. The turbo brush can be connected to the hand-held unit in the
same way.

BATTERY INSTALLATION

Insert the battery into the body of the hand-held unit and install it
to prevent it from coming loose. The battery is placed correctly when
you heard a sound. To release the battery, press the release buttons
and pull to disconnect.
Note: To prolong the battery life, always charge the battery when
the battery is nearly empty. Do not store or recharge the appliance in
environment with temperatures below 0 °C or higher than 40 °C. These
temperatures may damage the appliance. During the charging process,
the temperature of the appliance may increase, this is normal.
If you do not use the vacuum cleaner for more than 3 months, allow
it to charge for 12 hours. Then place the vacuum cleaner in a dry and
cool place.
USE
Before installing the battery, check if it is fully charged.
1. Press the ON/OFF button to switch on the appliance (Fig. 3).
2. Press the power button to switch to MIN, AUTO or MAX suction
power (Fig. 4).
3. Press the ON/OFF button again to switch off the vacuum cleaner.
Note: We recommend using the maximum power of the hand-held
unit in the case of a heavily soiled area or on carpets with medium
or high pile.
46
A
B.
Fig. 3
Fig. 4
VP6130
ACCESSORIES
Select the accessories according to the nature of the surface to be cleaned.
Mini turbo brush – suitable for bed linen, fabric, sofas, etc.
Slot nozzle – suitable for wall corners, car cushioning, radiators, etc.
Slot nozzle with brush – suitable for bed linen, fabric, sofas, etc.

EMPTYING THE DUST CONTAINER

To empty the dust container, press the emptying button. Open the container, empty the dust and close the container
cover.
REMOVING THE DUST CONTAINER
Press the buttons to release the dust container and move down and away from the appliance to remove the dust
container.
REMOVING THE FILTER
Remove the filters from the dust container upwards. Turn the coarse filter to the left and the HEPA filter to the right to
separate the filters. The filters can be rinsed in water. Allow the filters to dry before placing back into the dust container.
VP6130
EN
47

Publicidad

loading