Aqua Medic Qube 60 Manual De Instrucciones página 6

The housing may become hot during operation. Be cautious when touching it! For cleaning, disconnect

the light from the mains and let it cool down. Afterwards, take the light down.
When cleaning and operating, take care that no humidity passes the ventilation slits and enters the interior

of the lighting system!
Pay attention to a sufficient thermal exchange. Keep ventilation slits always free! Do not mount the system

in enclosures or behind panels. Missing aeration may result in overheating and damage electrical components.
Do not try to repair the light yourself. Please send it in for checking, preferably with a list of defects and a

copy of invoice, if applicable. Also, broken LEDs can be exchanged only by the manufacturer.
When working on the light, always pull all power plugs.

5. Installation
The light is mounted to a vertical glass pane with the included goose neck.
Pay attention to a sufficient distance to the water surface so no water or salt enters the light!
5.1. Mounting the aquarium fixing
Fig. 1: Holder incl. goose neck
The bracket is pushed onto a vertical aquarium pane and fixed with the two locking screws. The goose neck is
screwed into the thread of the bracket, the Qube is fixed at the other end. The cable of the power supply can
be fixed with cable ties on the goose neck.
5.2. Assembling/changing the lamp
Broken LEDs can be exchanged only by the manufacturer.
Fig. 2: Light colours (Qube 60)
6