Hinkley 60 DRAFTSMAN Manual De Instrucciones página 15

INSTALLING THE WALL CONTROL (continued)
Option 3. For Multi-Gang Wall Switch Box
Remove the existing wall plate and old switch from the wall
1
outlet box. (Fig. 3)
Connect the black lead wires from the switch in cradle A to
2
the black wires in the switch box. Hot input wire to one of the
cradle switch leads. Power lead to the fan is connected to the
remaining switch lead. (Fig. 4)
Attach cradle A to the wall switch box using supplied hardware.
3
4 Attach the multi-gang face plate (not included) to the switch
set in the wall outlet box. Cradle A Hinkley switch will fit in any
standard decora face plate.
NOTE: Remote transmitter will be held in place with built in magnets.
Outlet box
Switch
Figure 3
HIRO Control System
Outlet box
Cradle A
Figure 4
©2022 Hinkley Lighting, Inc. hinkley.com
Face plate
Face plate
Transmitter
13