PLAYKIN QUAD RACER Manual Del Usuario página 46

Lower front view
1. Turn the vehicle upside down. Fit the front axle into the vehicle body.
2. Make sure that the bent end of the steering column passes through the notch in the front axle
joint.
3. Insert eight bolts through the front axle and into the vehicle body, tighten them with a
screwdriver.
4. Tighten a lock nut on the bent end of the steering column with a spanner.
INSTALLATION OF THE FRONT WHEELS
Front wheel
1. Slide a ØD12 washer onto the front axle.
2. Slide a front wheel onto the front axle.
3. Slide a Ø12 washer onto the front axle.
4. Tighten a locknut on the end of the front axle with a spanner.
5. Fit the hub cap onto the wheel.
Front axle
Front axle
46
Lower front view