Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Child lock
4.
"-" button, less temperature/time.
5.
Temperature.
6.
Timer.
7.
On/Off.
• Place the heater on a level surface in a stable upright
position.
• Unwind the power cord and plug your heater into a power
socket (observing the instructions regarding positioning).
Ensure the voltage on the specification plate is the same as
in your home and the power
ground.
• Turn on the rocker switch at the side of the appliance
adjacent to the mains cable entry. The display will light
briefly.
• Press the button (7) to switch the appliance ON.The digital
display will display the room temperature and both power will
be lit.
• The "- "and "+" buttons can be used to select full power or
half power. This is indicated by the segments to the screen
right corner. Small segment lit = half power. Both segments
lit = full power.
• Unplug the appliance from the mains when not in use.
• The cable can be wrapped around the plastic cable tidy on
the front panel.
TO SET THE TIMER
Press the TIMER button (6). The clock symbol will illuminate. Then
use the "+" and "-" buttons to set the number of hours for which the
heater is to run before automatically switching off. The timer can be
set for up to 18 hours.
cord is lying safely on the
35
Publicidad
