Components - Optimus UMX-LNK/E Manual De Instrucciones

2. COMPONENTS

1) POWER indicator light.
Power LED indicator. The card is powered by the audio matrix. Do not remove
the card when it is lit.
2) AUDIO LINK INPUT 1 SURVEILLANCE.
Open collector output contact. Normally open contact. The contact closes
when a fault is detected in the cable connection AUDIO LINK INPUT 1
OPEN COLLECTOR
CONTACT SCHEME
3) Power LED indicator. Indicates that the card is powered,
either through the audio matrix itself or through the link
with the other matrices through pin 3 of the AUDIO LINK
INPUT 2 and AUDIO LINK OUTPUT 2 connectors
4) RJ45 Connector AUDIO LINK OUTPUT 1.
RJ45 PIN OUT
Pin 1: CHANNEL 1 AUDIO OUTPUT HOT.
Pin 2: CHANNEL 1 AUDIO OUTPUT COLD.
Pin 3: CHANNEL 2 AUDIO OUTPUT HOT.
Pin 4: CHANNEL 3 AUDIO OUTPUT COLD.
Pin 5: CHANNEL 3 AUDIO OUTPUT HOT.
Pin 6: CHANNEL 2 AUDIO OUTPUT COLD.
Pin 7: OUTPUT SURVEILLANCE LINK 1
Pin 8: GND.
Metal Shield
* In the AUDIO LINK OUTPUT 1 connector, the connection to the
chassis of the equipment is made through the Internal DIP Switch
5 and the connection between the shielding of the connector to
the GND is made through the internal DIP Switch 6.
UMX-LNK/E version 3.2.000 ENG
Figure 2.
*
DIP Switch 5
GND
*
DIP Switch 6
UMX-LNK/E
RJ45 connector
pinout
5) Power LED indicator. Indicates that the card is powered,
either through the audio matrix itself or through the link
with the other matrices through pin 3 of the AUDIO LINK
INPUT 2 and AUDIO LINK OUTPUT 2 connectors
6) RJ45 Connector AUDIO LINK OUTPUT 2.
RJ45 PIN OUT
Pin 1: EMERGENCY CHANNEL AUDIO OUTPUT HOT.
Pin 2: EMERGENCY CHANNEL AUDIO OUTPUT COLD.
Pin 3: 24 VDC LINK (Degraded mode functionalities:
Pin 4: CHANNEL 4 AUDIO OUTPUT COLD.
Pin 5: CHANNEL 4 AUDIO OUTPUT HOT.
Pin 6: EMERGENCY PRIORITY OUTPUT CONTACT.
Pin 7: OUTPUT SURVEILLANCE LINK 2.
Pin 8: GND.
Metal Shield
* In the AUDIO LINK OUTPUT 2 connector, the connection to the
chassis of the equipment is made through the Internal DIP Switch
8 and the connection between the shielding of the connector to
the GND is made through the internal DIP Switch 7.
Audio link card for slave matrix
COMPACT-E or UMX-03/0E
Figure 1
Through pin 3, the card is powered from the other
matrices, which guarantees its operation even in
the event that the matrix itself is not powered).
*
DIP Switch 8
*
DIP Switch 7
GND
5