Descargar Imprimir esta página

Ceteor Booster 12V Modo De Empleo página 51

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 54
C.
Indicate 0 volt on the voltmeter:
-> check the voltage on the clamps with a multimeter
O volt = the internal fuse is blown (see point 3.3.).
n
The voltage is good = the voltmeter or push button is broken or defective.
n
5.2. General questions
A.
Can a Booster too powerful (example 12V/1200CA) damage a small engine (example a
motor bike) ?
No, the engine will only take the necessary power to start.
B.
May I use my Booster as battery for my fridge, mobile phone,... ?
Yes this is possible but not at all recommended. Because under 12,4V the sulphatation
process starts.
C.
How many times do I need to recharge the Booster ?
The power of the provided charger is designed to recharge the Booster at 100% overnight
(for a normal use).
D.
Once the Booster is connected to the vehicle to jump start, do I have to make the start
attempt quickly ?
Yes, otherwise a part of the tension of the Booster will be transferred to the empty battery
of the vehicle. Your booster will be discharged for the next start.
If you have others questions or in case of a problem;
please contact your seller.
51
EN
(

Publicidad

loading