Wilfa EASY MELT SAM1B-1000 Manual De Instrucciones página 10

BEFORE FIRST USE
EN
Note: During the initial use of this product, it may produce some smoke and
smell. This is normal and will subside with further use.
Note: Before using this appliance for the first time, the hotplates should be
cleaned with a moist cloth.
USE
Caution: Always insert both detachable plates before plugging in the unit. See
page 9 on how to insert plates.
Caution: Do not use this appliance to cook or defrost frozen food. All food must
be completely defrosted before cooking it with this product.
Caution: Do not use metal utensils on this product, as they will scratch and dam-
age the plates' non-stick coating.
1. Insert the plug into a standard electrical outlet. Make sure that the voltage to
be used corresponds with the rated voltage of your appliance.
2. Close the appliance while it heats up.
3. The power indicator will light up in red. When the light shifts to green, the
toast iron is ready for use.
4. Release the latch to open the unit. Place sandwich on the lower plate using
wooden or plastic heat-resistant utensils. Close the appliance carefully and
lock the appliance. Do not shut the appliance with force. Steam may be eject-
ed from between the hotplates.
5. Once the sandwich is toasted according to your personal preference, release
the latch to open the unit, then remove the toast using wooden or plastic
heat-resistant utensils. If more cooking will be done at this time, close the unit
to conserve heat.
6. Repeat steps 3-5 until all cooking is complete.
7. Turn off the product by unplugging the power cord from the electrical outlet.
8. When the unit has completely cooled, remove the plates to clean, then dry.
Note: Care must be taken to ensure that fingers do not come into contact with
the hotplates.
INSTRUCTION MANUAL · EASY MELT
8