Bertolini 318 Uso Y Mantenimiento página 55

fig. 11
LUBRICATION
Engine: See engine manual.
Motorcultivator: Follow instructions shown
on table - use only ESSO UNIFARM 15-40 X
oil and ESSO MULTIPURPOSE grease.
1) ENGINE
Every day: check level and top up if neces-
sary.
Oil replacement: to be carried out according
to intervals and methods set out by the en-
gine manufacturer.
2) GEARBOX (capacity 4,5 Kg, 5,5 Kg with
Reversing Gear).
Every 200 hours: check level and top up if
necessary.
Every 500 hours: replace oil.
3) POWER TAKE-OFF FOR IMPLEMENTS
Before attaching implements, fill up with
MULTIPURPOSE grease.
4) ROTARY HOE BOX
(Capacity 0,5 It.)
Every 25 hours: check level and top up if
necessary.
fig. 12
Evely 250 hours: replace oil.
5) HANDLEBARS
Every 100 hours: grease.
GEAR BOX OIL REPLACEMENT
Oil must be replaced when hot, by un-
screwing fillcap A (fig. 12) and B (Fig. 13).
When oil is completely drained, replace cap
A and fill up with new oil through hole B (4,5
Kg in the normal version and 5,5 Kg in ver-
sion with Reversing Gear).
Check level with indicator C (Fig. 13).
This operation is to be done with motor cul-
tivator in horizontal position.
53
fig. 13