Bertolini 318 Uso Y Mantenimiento página 56

TYRE INFLATION
Often check that tyre pressure be within the
limits of 1-1,2 bar (Kg/cm2).
CONTROLS ADJUSTMENT
CLUTCH - Check the idle stroke of the clu-
tch lever regularly. This should be approxi-
mately 5 mm.
- In order to change adjustment, loosen nut
A (Fig. 14)
- Set stroke to about 5 mm by screwing or
unscrewing adjuster B.
- Lock nut A again.
BRAKES - With levers 4 and 5 (Fig. 2) lowe-
red, the wheels must be blocked. If this is
not the case, loosen nuts B and then set
adjuster A (Fig. 15). When adjustment is
obtained lock nut A again.
DIFFERENTIAL LOCK - If the differential
lock is still engaged when lever 3 has been
put in idle, obtain the proper regulation by
using adjuster A.
HANDLES ROTATION LEVER - If by pulling
lever 11 (Fig. 17), the handles are not relea-
sed, then set adjuster A (Fig. 16).
fig. 14
fig. 15
fig. 16
fig. 17
54