PNI House IP575 Manual De Usuario página 4

Control from the ICSee application
Adding the camera to the application
1. Install the ICSee application by accessing Google Play or the App Store or
by scanning the QR code below:
Android
2. Create an account in the application or log in if you already have one.
3. Activate the GPS Location function in your phone.
4. Power the camera with the power supply adapter in the package. You will
immediately hear the message "System starting up. Wait to be configured".
If you do not hear this message, reset the camera by long pressing the
Reset button on the motherboard, next to the micro SD card slot.
5. In the application, press the + icon to add your camera.
6. Select "WiFi Camera".
7. Select the WiFi network you want to connect the camera to and add the
network password. Note: For the first setup, position the camera and phone
as close as possible to the WiFi router. Both devices must be connected to
the same WiFi network.
8. Press "Confirm", then "Next".
9. A QR code appears on the phone screen. Position the phone in front of
the camera lens. Wait for the connection. At the end, you will hear the
connection confirmation message.
10. Choose a password for the camera.
11. Press "Confirm".
12. Choose a name for your camera.
13. Choose the recording mode: continuous or only in case of an alarm.
14. Press "Next" and "Done" to complete the procedure.
Note: If the procedure fails, reset the camera and repeat the steps above.
User manual 4
iOS