Descargar Imprimir esta página

Huawei MLY-B10 Guia De Inicio Rapido página 15

Ocultar thumbs Ver también para MLY-B10:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 69
oil depot, or chemical plant, for example). Using your device in these environments increases the risk of
explosion or fire.
• Dispose of this device, the battery, and accessories according to local regulations. They should not be
disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other haz-
ards.
• The device has undergone testing and has demonstrated water resistance in certain environments.
• The device has a built-in, non-removable battery. Do not attempt to remove the battery, otherwise the
device may be damaged.
• If the battery leaks, ensure that the electrolyte does not make direct contact with your skin or eyes. If the
electrolyte touches your skin or splashes into your eyes, immediately flush with clean water and consult a
doctor.
• When charging the device, make sure the power adapter is plugged into a socket near the devices and is
easily accessible. Unplug the charger from the electric socket and from the device when the device is not
used for a long time.
• Unplug the charger from electrical outlets and the device when not in use.
• Do not place sharp metal objects, such as pins, near the microphone. The microphone may attract these
objects and result in injury.
• Wireless devices may interfere with the airplane's flight system. Do not use your device where wireless
devices are not allowed according to the airplane company's regulations.
• To ensure the best audio performance of your device's microphone, use a cloth to wipe the area of the mi-
crophone which has been exposed to water. Do not use the microphone until the wet areas are totally dry.
• Switch off your wireless device whenever you are instructed to do so by airport or airline staff. Consult the
airline staff about the use of wireless devices on board the aircraft, if your device offers a "flight mode",
this must be enabled prior to boarding an aircraft.
• Ensure that the power adapter meets the requirements of IEC/EN 62368-1 and has been tested and ap-
proved according to national or local standards.
• Protect the wearable and its accessories from strong impact, strong vibration, scratches, and sharp ob-
jects, as these may damage the device.
13

Publicidad

loading

Este manual también es adecuado para:

Mly-b11